Ozone Chambers and Monitors: ISO/IEC 17025 Calibration & Service
Repair in Progress OREC (OREC™), now located in Akron, Ohio, are the manufacturers of OREC™ Ozone Test Chambers, OREC™ Ozone Test Chamber Accessories and OREC™ Ozone Monitors.
The instruments, manufactured by CCSi, continue to bear the OREC™ name and be constructed with the same components, processes and attention to quality for which OREC™ has become renowned.
OREC™ now also features a full service ISO Certified Calibration Laboratory to accommodate OREC™ Ozone Monitors and Chambers, as well as those of other manufacturers.
Additionally, OREC™ has recently achieved NIST direct traceability for the measurement of ozone concentrations. On a global scale, OREC™ is one of a very few manufacturers of ozone instruments to have direct NIST traceability.
Please call  1.800.742.8535, or email OREC™ Service to discuss your ozone instrument calibration or service needs. OREC™ can calibrate and service virtually any ozone chamber or ozone monitor, including those using chemical titration.
ISO/IEC 17025 Certified Calibration Laboratory
Calibration in Progress “This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories. This laboratory also meets the additional program requirements in the field of calibration. This accreditation also demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).” American Association for Laboratory Accreditation
ISO/IEC 17025
Accredited Calibration Laboratory
Calibration Certificate 1424.01
Mechanical Testing Certificate 1424.02
NIST Direct Traceability
OREC™ NIST Traceable Monitor Calibration OREC™ Ozone Monitors, Model DM100, Serial Numbers 318 and 748 were certified as a first level calibration source with primary traceability to NIST. Through the NIST Calibration Program, the testing was performed, and the reports prepared, by NIST at their laboratory in Gaithersburg, Maryland on July 7, 2003. OREC™ Ozone Monitor, Serial Number 748, was calibrated again on September 7, 2005. On October 15, 2007 OREC™ Ozone Monitors, Serial Numbers 318, 748 and 757 were certified by NIST. They were re-certified on August 19, 2009 as part of our ongoing commitment to quality.
National Institute of
Standards & Technology
Reports of Analysis
Direct (Primary) Traceability
NIST Report 839.03-03-155
NIST Report 839.03-05-168
NIST Report 839.03-08-004
NIST Report 839.03-09-142
| Adobe® PDF Documentdownload  | quickquote | techinfo | back | home |
Index Terms: ozone chamber, ozone monitor, service, repair, calibration, certification, ISO 17025, ISO/IEC 17025, A2LA, OREC, ozone test chambers, ozone, ozone destruction, ozone generation, ozonator, ozone generator, Osmonics, ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575, ozone research, rubber cracking, NIST, ozone resistance, rubber, crack growth, weathering, rubber deterioration, surface cracking, ozone cracking, ozone measurement, rubber test, ultraviolet, chemical titration.
© 2010 OREC, a Division of CCSi, Inc.
All Rights Reserved • Published: March, 2010
221 Beaver Street • Akron, Ohio 44304 • U.S.A.
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500