OREC™ 0500 – 0900 Series Ozone Test Chambers: Specifications
| model: | 0500 | 0900 | 0500A | 0900A | 0500C | 0900C |
| test methods: 1 | c · d · g · h j · i · k · l |
a · e · f · g h · i · j · k · l |
a · c · d · g· f h · i · j · k · l |
|||
| ozone generator: | quartz uv | corona discharge | quartz uv & corona discharge |
|||
| ozone range: | 0–250 pphm/vol 0–1000 pphm/vol 2 |
10–300 ppm/vol | 0–250 pphm/vol 10–300 ppm/vol 0–1000 pphm/vol 2 |
|||
| air flow: cfm | 0–6 | 0–15 | 10–20 | 10–20 | 10–20 0–61 |
10–20 0–15 |
| system accuracy: | measurement: 3% of reading Control: 4% of set–point | |||||
| temperature: | up to 90° C (194º F) | |||||
| oven chamber: cm in. |
61 x 46 x 51 24 x 18 x 20 |
76 x 76 x 76 30 x 30 x 30 |
61 x 46 x 51 24 x 18 x 20 |
76 x 76 x 76 30 x 30 x 30 |
61 x 46 x 51 24 x 18 x 20 |
76 x 76 x 76 30 x 30 x 30 |
| oven chamber: m³ ft³ |
0.142 5.000 |
00.443 15.625 |
0.142 5.000 |
00.443 15.625 |
0.142 5.000 |
00.443 15.625 |
| dimensions: cm in. |
122 x 64 x 84 48 x 25 x 33 |
137 x 91 x 114 54 x 36 x 45 |
122 x 64 x 84 48 x 25 x 33 |
137 x 91 x 114 54 x 36 x 45 |
122 x 64 x 84 48 x 25 x 33 |
137 x 91 x 114 54 x 36 x 45 |
| net weight: kg lb |
180 410 |
261 580 |
273 600 |
355 780 |
282 620 |
364 800 |
 1 test method references |
||
| a) | ASTM D470 | crosslinked insulations and jackets for wire and cable |
| b) | ASTM D518 | rubber deterioration–surface cracking |
| c) | ASTM D1149 | rubber deterioration–surface ozone cracking in a chamber |
| d) | ASTM D1171 | rubber deterioration–surface ozone cracking outdoors or chamber |
| e) | ASTM D1352 | ozone–resisting butyl rubber insulation for wire and cable |
| f) | ASTM D1373 | specification for medium-voltage rubber insulating tape: withdrawn in 1986 |
| g) | ASTM D3041 | testing coated fabrics–ozone cracking in a chamber: replaced by D1149 |
| h) | ASTM D3395 | rubber deterioration–dynamic ozone cracking in a chamber |
| i) | ASTM D4575 | rubber deterioration reference and alternative method(s) for determining ozone level in laboratory test chambers, (method a only) |
| j) | ISO 1431–1: 1989 | resistance to ozone cracking – part 1: static strain |
| k) | ISO 1431–2: 1994 | resistance to ozone cracking – part 2: dynamic strain test |
| l) | ISO 1431–3: 2000 | resistance to ozone cracking – part 3: reference and alternative methods for determining the ozone concentration in laboratory test chambers |
| 2 requires the optional additional uv lamp. |
||
|  download
| print
| quickquote
| techinfo
| back
| home |
|
|
|
Index Terms: OREC, OREC, 0500, 0900, ozone test chambers, ozone, ozone destruction, ozone generation, ozonator, ozone generator, ozone test chamber, ozone monitor, Osmonics, ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575, ASTM D470, ISO 1431, ozone research, rubber cracking, ozone resistance, rubber, crack growth, weathering, rubber deterioration, surface cracking, ozone cracking, ozone measurement, rubber test, ultraviolet, UV.
|
All Rights Reserved • Published: March, 2010
221 Beaver Street • Akron, Ohio 44304 • U.S.A.
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500